Hole Cutter Punch Screw 20mm

Ideal for thin layered materials up to 4mm. Can deliver a smooth clean circular hole cut into the surface material giving a burr-free smooth circular hole. Suitable for Sheet Steel, Stainless Steel Sheets, Non-Ferrous Metals, Light Metals and Plastics. Used in the plumbing industry for sinks to produce a plug hole or to allow a tap/other fittings to be installed. Used in all trades including electrical and construction.

• High quality steel cutting and bracing edges.
• Clever design results in a burr-free hole by evenly spreading pressure during cutting.
• Once pilot hole is drilled and cutter is attached, use a spanner to turn the cutter and thread will apply the required pressure.
• Accurate cutting, ideal for cutting sinks for taps and drain fittings.
• No extra finishing needed, due to clean cutting.
• Used in all trades including electrical and construction.
• Model No. HCPS20